|
Dimensions
|
High Back with
Crown/Curve |
| Overall height |
34” |
| Chair depth |
23.5" |
| Width |
20"
or 22" |
| Footprint |
21" x
18" |
| Seat depth |
18" |
| Seat back height |
18 1/2" |
| Weight approx. |
20.5 |
| COM fabric |
1.7 yards |
Additional Available Widths
Meridian 20" or 22"
Body
10 plys of select hardwoods, .75” thick.
Legs
21 plys of select hardwoods including 2 oak faces, 1.25” thick. Legs are cut 1.5”
wide and have routed corners.
Foam
The Meridian seat foam is 2.5" of 2.4 LB true urethane density foam.
Rails
Solid oak .75” thick.
Bookracks
.25” thick MDF. Bookrack clearance is approximately 3
1/4".
Ganging Device
.25” thick polypropylene. They carry a lifetime warranty against breakage.
COM (Customer’s own material)
Estimates above are based on 54” wide fabric. A sample must be submitted to Uniflex CFI for approval and actual yardage requirements.
Glue
Bordon Casco CR-583.
Design
-
Units are constructed of a one piece molded hardwood
unibody, molded hardwood legs, solid oak and other hardwoods, commercial grade fabrics and
post catalyzed lacquer varnish finishes.
-
The Meridian chairs
utilize mortise and tenon joints, the strongest type of joint
available for wood furniture and a sure sign of quality.
-
Suggested spacing back to back for rows is 36”. All units stack 7 high. One stack occupies approx. 4.3 square feet.
-
Cushions and body are fully upholstered. Wood back units are available.
-
Ganger swivels out of sight for safety and appearance when not in use.
-
All recommended fabrics exceed commercial standards for wear and stain resistance.
-
Slide out kneelers available.
|
